LED PCB Rigid Bar Side Light - 60 LEDs - 500mm Long - 120 LED/meter (Adafruit NeoPixel compatible)
This LED rigid bar is the perfect lights for anyone that's looking to add vibrant, glowing light at a 90 degrees angle into their life! They're super slim and rigid measuring only 10mm in width, this LED strip is ideal for use in accent lighting, back lighting, edge lighting and much more!
This LED strip uses an SK6812 driver chip which is based on the WS2812 chip that most NeoPixel products use. This means that this LED bar will work perfectly with Adafruits NeoPixel library so you'll be up glowing and programming lighting patterns in no time!
The strip is constructed of flexible white PCB material. Solder to the 0.1" copper pads or use the JST connector, and you're good to go! Of course, you can also connect strips together to make them longer, just watch how much current you need! These strips come in 0.5m strips with a 3-pin JST SM connector on each end. For the power wires, you will also probably want a 2.1mm DC jack to wire in, so you can connect a 5V wall adaptors to power it.
- LED Position: 90 degree angle on strip
- Beam Angle: 120 degrees
- Emitting Colour: Full colour
- Operating Voltage: 5V DC
- Power(W): 15 +- 1W per 1m
- IC Control: SK6812
- LED Bar Dimensions: 500mm x 5mm x 4mm / 19.6" x .19" x .15"