SparkFun Products

DESCRIPTION This is a 12-step rotary encoder with a nice 'clicking' feel. It's breadboard friendly and has a pretty handy select switch (by pushing...

DESCRIPTION The SparkFun Inventor's Kit (SIK) is a great way to get started with programming and hardware interaction with the Arduino programming ...

DESCRIPTION If you aren't familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device bo...

DESCRIPTIONThis plastic knob accepts a 6mm shaft and has a 15mm outer diameter. They simple press-fit onto a shaft. These are clear so that they ca...

DESCRIPTIONRotary encoders can be used similarly to potentiometers. The difference being that an encoder has full rotation without limits (It just ...

DESCRIPTION The AD8232 Single Lead Heart Rate Monitor is a cost-effective board used to measure the electrical activity of the heart. This electric...

DESCRIPTIONThe LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer...

DESCRIPTIONThe SparkPunk Kit is a sound generator made in the spirit of the Atari Punk Console. Rather than simply recreating the Atari Punk, the S...

DESCRIPTION This straight bar load cell (sometimes called a strain gauge) can translate up to 5kg of pressure (force) into an electrical signal. Ea...

DESCRIPTIONThis is a breakout board for the 3 axis ADXL335 accelerometer from Analog Devices.This is the latest in a long, proven line of analog se...

DESCRIPTIONThe smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL a...

DESCRIPTIONThis is a tiny 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder...

DESCRIPTION6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltag...

DESCRIPTIONThis is a 28-Pin SSOP to DIP breakout board. The footprint was rotated to accommodate different width SSOP devices and can be used with ...

DESCRIPTIONThis is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole und...

DESCRIPTIONThe XBee Explorer Regulated takes care of the 3.3V regulation, signal conditioning, and basic activity indicators (Power, RSSI and DIN/D...

DESCRIPTION This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldere...

DESCRIPTIONBasic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC! VCCI...

DESCRIPTIONThe Arduino Pro Mini is SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mi...

DESCRIPTIONThis is the latest evolution of SparkFun's serial LCD. Included on a single board is a 16x2 LCD and an embedded circuit based around a P...

DESCRIPTION This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis accele...

DESCRIPTION The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to...

DESCRIPTION This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole ...

DESCRIPTIONThis a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered...