Prototyping Breakout Boards

DESCRIPTION A handy-dandy breakout that converts between the picoblade connector cable on the PMS5003 particulate matter sensor and a standard male...

DESCRIPTION The Terminal Breakout board for the BBC micro:bit does exactly what it says on the tin. It breaks out all of the signal and power pins ...

DESCRIPTIONThe smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL a...

DESCRIPTION6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltag...

DESCRIPTION This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldere...

DESCRIPTIONBasic breakout board for FTDI's popular USB to UART IC. Now with internal oscillator and EEPROM, the FT232RL is an impressive IC! VCCI...

DESCRIPTION This is the RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The on...

DESCRIPTION The NCP1400 is a 3.3V DC-DC converter. The breakout board will accept voltage inputs between 1 and 3 Volts (such as 1 or 2 AA batteries...

DESCRIPTIONWith SD and MMC memory prices dropping, the time is right for mass storage and datalogging. This breakout board will allow you to breako...

DESCRIPTION Breakout board for the microSD socket that is not much bigger than your fingernail. Compatible with the SPI interface found on any SD c...

DESCRIPTIONThis is a high-quality, easy to use 28 pin ZIF socket that is 0.3" wide. Makes for easy connecting or programming to DIP ICs. Uses high ...

DESCRIPTION This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and the board includes 4 mounting holes in the ...

DESCRIPTION Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock ...

DESCRIPTIONThis is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard...

DESCRIPTIONThis is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with offic...

DESCRIPTIONThe TLC5940 is a 16 channel PWM unit with 12 bit duty cycle control (0-4095), 6 bit current limit control (0-63), and a daisy chainable ...

DESCRIPTIONNot just a simple breakout board, this microSD adapter goes the extra mile - designed for ease of use. To use with an Arduino, conn...

DESCRIPTIONThis breakout for the Silicon Laboratories Si4703 FM tuner chip is a little more stripped down than the FM Tuner Evaluation Board. If yo...

DESCRIPTIONThis is a more universal GPS breakout board that uses a vertical SMD connector for any of the EM401 or EM406 GPS module cables that we s...

DESCRIPTIONThis is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-...

DESCRIPTIONThis is a low-cost, basic SOIC breakout board. This custom PCB will interface a standard SOIC package IC to 0.1" headers, which are easi...

DESCRIPTION This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB ...

DESCRIPTIONThis is a breakout board for the very handy 16-Channel Analogue/Digital Multiplexer/Demultiplexer CD74HC4067. This chip is like a rotary...

DESCRIPTIONIf you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The bi-directional logic level conver...