Components

DESCRIPTIONFancy internet enabling your kettle or your washing machine? This 28 pin IC is a 10BASE-T stand alone Ethernet Controller with on board ...

DESCRIPTION It's the end of the world, and you need a button to press. This is it. A 98mm diameter (outside diameter) dome illuminated push button ...

DESCRIPTIONMiniature Single Pull Single Throw switches. These are high quality momentary on switches. Perfect as a tactile reset switch. Mounts dir...

DESCRIPTIONThese tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colours for a total of 12...

DESCRIPTIONThis is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. ...

DESCRIPTIONThis is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it 'clicks' really ...

DESCRIPTION The 18F4550 from Microchip offers full speed USB 2.0. The chip has 16K of on board flash memory and runs at 12MIPS with a 4MHz external...

DESCRIPTIONThe PIC 16F627 effectively replaces the well used 16F84. It is pin compatible, but has several massive advantages over its older brother...

DESCRIPTION This is one of Microchip's biggest MCUs. It has five ports (33 I/O lines!), runs at up to 20Mhz with a whopping 8k of program memory. T...

DESCRIPTION RETIRED PRODUCT - We've stopped stocking this product or it has been retired by the manufacturer and is no longer for sale. This page ...

DESCRIPTIONThis is a 28-Pin SSOP to DIP breakout board. The footprint was rotated to accommodate different width SSOP devices and can be used with ...

DESCRIPTION This is the LD1117V33, a basic voltage regulator in the TO-220 package. Perfect for low voltage 3.3V parts.FEATURESRESOURCES Datashee...

DESCRIPTIONBasic, bog standard 3mm Red LED. Ideal for visual display of power, data, or just to make sure that a logic output is doing what it shou...

DESCRIPTIONBasic, bog standard 3mm green LED. Ideal for visual display of power, data, or just to make sure that a logic output is doing what it sh...

DESCRIPTIONBasic, bog standard 3mm yellow LED. Ideal for visual display of power, data, or just to make sure that a logic output is doing what it s...

DESCRIPTIONThis is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole und...

DESCRIPTION This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldere...

DESCRIPTIONAtmel's ATMega328 8-Bit Processor in 28 pin DIP package. It's like the ATmega168, with double the flash space. 32K of program space. 23...

DESCRIPTION LED, 3MM, BLUE LED / Lamp Size:3mm / T-1 LED Colour:Blue Typ Luminous Intensity:800mcd Viewing Angle:60° Forward Current:20mA Voltage,...

DESCRIPTIONThis is a basic, NPN transistor. It can be used as a switch where a logic output can't supply (or sink) enough current. In some circumst...

DESCRIPTIONBog standard 220 ohm resistor.FEATURES Power Rating: 0.25W Resistance: 220ohm Resistance Tolerance: ± 5% Operating Temperature R...

DESCRIPTIONThis is a bog standard 220 K ohm resistor.FEATURES Power Rating: 0.25W Resistance: 220K ohm Resistance Tolerance: ± 5% Operating...

DESCRIPTION Governed by Ohm's law. RESISTOR, 0.25W 5% 10K Power Rating:0.25W Resistance:10,000 ohm Resistance Tolerance:± 5% Operating Temperature...

DESCRIPTION These operate when tilted from the horizontal position. The switch movement required to cause contact change is called the differential...